Structa V Truss is an improvement on our original Structa Corner design. V Truss provides greater strength, ease of installation and increased embedment. V Truss is the result or our continued commitment to providing the best lathing products possible.

Straight and True Corner Reinforcement

• Engineered to provide superior reinforcement for stucco corners

• Unique 'Truss' design ensures a 'true' straight corner every-time.

• Improved embedment

• Lots of nailing opportunities

• Easy to handle - few sharp ends

• Twin Tracs for easy attachment and increased rigidity

Structa V Truss is available in 3 profiles: 3 Coat, 1 Coat and Bullnose

• V Truss 3 Coat and 1 Coat have three nose wire - 2 1/2" legs.

• Available in 10', 9' and 8' lengths

• V Truss Bullnose has four nose wires to give a smooth round nose

Specialty profiiles are available in our original Structacorner 'loop' design

• Structacorner Arch are available in 3 coat and Bullnose (7/16" radius)

• Structacorner Short Flange - 3 Coat, 1 Coat or Bullnose

• Short Flange are 2 1/2" by 1 1/2" leg lengths

V Truss and Structacorner Packaging:

• 400 lineal ft. per carton

• 30 cartons per pallet

All nose wires should be covered with 1/8" stucco.

Products should be stored per ASTM C1063-97